Ukugqwesa kokubumba i-PC Injection: Umenzi wakho waseTshayina othembekileyo

Isiqinisekiso se-ISO 9001 kunye ne-ISO 14001 | Ingcali ye-OEM/ODM | Amava eHlabathi angaphezu kweminyaka engama-20

Njengenkokheli yeTshayina Ukubumba inaliti yePC umenzi, iYongchao inikezele ngezinto ezibalulekileyo kubathengi beFortune 500 kulo lonke elaseYurophu, eMntla Melika, naseAsia ukusukela ngo-2002. Ifektri yethu eseDongguan igxile ekucwangcisweni kwezibane ze-PC ezifakwe inaliti kunye nezicelo ezifuna ukunyamezelana kwe-±0.05mm. Xa umthengi efuna ukugqitywa kweKlasi A, ubuchule bethu bokubumba i-PC eyenziwe ngokwezifiso bunciphise ixesha labo lokuqhuba izixhobo nge-40% ngelixa befikelela kumazinga angenanto kwiziphene kwiiyunithi ezili-100,000. Siqinisekisa izisombululo ezihambelana ne-RoHS ukusuka kwiprototype ukuya kwimveliso enkulu.

Cofa ukuze ubuze

Jonga ngezantsi imveliso eyenziwe sithi kutshanje, ikwiPC SABIC LEXAN LS2 ebonakalayo.

Kutheni iPC Isebenza Kakuhle Kakhulu?

Ipropati	Ikhompyutha	I-ABS	I-PP
Amandla empembelelo	850 J/m (iilensi ezingaphukiyo)	400 J/m	35 J/m
Ukumelana nobushushu	135°C rhoqo	85°C	100°C
Ukucaca kokukhanya	Ukuhanjiswa kokukhanya kwe-89%	I-Opaque	Ikhanya ngokukhanya
Ubukhulu bodonga	0.5mm umzuzu.	1.0mm umzuzu.	0.8mm umzuzu.

Izinto Ezibalulekileyo Zokucubungula:

● Ubushushu bokubumba ngenaliti yePC: 280-320°C (536-608°F) ukuze kubekho ukuhamba kakuhle kwe-elektroniki

● Ikhompyutha Ukubunjwa kwenaliti ye-ABS ubushushu: 240-260°C (464-500°F)

● Ubungakanani bodonga lwe-PC ABS yokubumba ngenaliti: 0.8mm (0.031")

Iinkonzo ezikhethekileyo zaseYongchao:

1. Ubuchule bokwenza izibane ezicacileyo

Njengefektri ye-OEM ephezulu ye-PC ecacileyo yokubumba isibane, sinikezela:

● Iinhlanganisela zokubumba inaliti zePC/TPU okanye zePC/ABS ezingenamthungo

● Iimpahla ezenziwe ngokwezifiso: Iipateni ezisikiweyo ngedayimani, iingubo ezithambileyo zokugquma

2. Ukucaca kwe-Optical-Grade

● >89% yokudluliselwa kokukhanya (iilensi zonyango, iikhabhathi zekhamera yedrone)

● Isiqinisekiso sokulwa nombala otyheli ngokusebenzisa ubushushu bokubumba i-PC elawulwayo

3. Ubuchule beJiyometri eNzima

● Ubungakanani bodonga obuncinci bePC ABS obuyi-injection molding ukuya kwi-0.8mm

● Ukubumba okuncediswa yigesi kwiindawo ezityebileyo (>5mm)

4. Ngaphakathi kwiFektri yethu yokuNciphisa i-PC ye-China

Iziseko zoPhuhliso oluPhambili

● Ii-Injection Press ezingama-39 (iitoni ezili-10-550)

● Ivenkile yokulungisa izixhobo: CNC, Mirror EDM, CMM test

Ukuba singakunceda ngeprojekthi yakho yokubumba i-PC injection molding, sitsalele umnxeba ku-+86 177 2234 8956 okanye usebenzise iFomu yethu yoQhagamshelwano.

Masithethe