Mohala
Romela Imeile
WhatsApp
Moetsi oa PPS Ente ea ho Bopa Chaena | Litharollo tsa Plastiki tse Sebetsang ka Bongata
Setifikeiti sa ISO 9001:2015 | Mekhahlelo e Retardant ea Lelakabe e Tsebahalang ka UL | Ho Latela Melao ea Likoloi le ea Bongaka
Jwalo ka moetapeleHo bopa ente ea PPSmoetsi Chaena, re etsa meralo ya dikarolo tsa PPS tse entsweng ka boikgethelo bakeng sa ditikoloho tse feteletseng. Ka dilemo tse fetang 20 tse ikgethang ka ho khetheha ditshebedisong tsa polyphenylene sulfide, re fana ka dikarolo tsa bohlokwa bakeng sa dikgokelo tsa dikoloi, disebediswa tsa ho buoa, le ditsamaiso tsa difofane - re kopanya boiphihlelo ba saense ya thepa le tlhahiso e kopantsweng ka ho otloloha.
Tobetsa bakeng sa lipotso 
Thepa e entsoe ka PPS+40% GF RYTON R4-200
PPS Ente Molding ke eng
Polyphenylene sulfide (PPS) ke polymer e nang le mocheso o phahameng, e nang le semi-crystalline e tsebahalang ka:
● Litšobotsi tsa ho thibela malakabe (UL94 V-0 ntle le lintho tse ling tse eketsang)
● Ho hanyetsa lik'hemik'hale khahlanong le mafura/lihlapolli
● Botsitso bo ikhethang ba tekanyo (± 0.1% ho fokotseha)
● Tšebeletso e tsoelang pele ho 220°C (428°F)
Ho enta ka ente ea PPS ho fetola metsoako ena ea ho bōpela hore e be likarolo tse nepahetseng joalo ka li-valve tsa sistimi ea mafura le li-insulator tsa motlakase. Ho fapana le polasetiki ea setso, PPS e hloka ts'ebetso e khethehileng ho notlolla bokhoni ba eona bo felletseng.
Haeba re ka thusa ka projeke ea hau ea ho etsa li-enjection tsa PPS, re letsetse ho +86 177 2234 8956 kapa u sebelise Foromo ea rona ea ho Ikopanya.
A re bueng
E entsoe ka thepa PPS+40% GF A504X90 BK
Liindasteri le Likopo
Likoloi
● Likhoele tsa ho hotetsa, matlo a sensor
● Ho sebelisa PPS' 240°C ho hanyetsa mocheso o sa khaotseng
Lisebelisoa tsa elektroniki
● Bajari ba SMT, metheo ea li-relay
● Ho sebelisa thepa ea UL94 V-0 e thibelang malakabe
Indasteri
● Li-impeller tsa pompo ea lik'hemik'hale, lihoko tsa ho jara
● Ho sebelisa hampe khanyetso e ke keng ea hlōloa ea lik'hemik'hale
Bongaka
● Lisebelisoa tsa ho buoa tse ka hloekisoang
● Ho rua molemo ho latela melao ea USP Class VI
Netefatso ea Boleng le Maemo
Liprothokholi tsa Netefatso e Matla
● Liteko tsa litekanyo: CMM (ho nepahala ha ± 5μm)
● Litifikeiti: ISO 9001, ISO14001
Taolo ea ho Tiea ha Lihlopha
● Tlhokomelo ea SPC ea nako ea sebele ea li-parameter tsa ho etsa ente
● Lisetifikeiti tsa thepa e ka lateloang ke lotho (Solvay Ryton®, Celanese Fortron®)
Temohisiso ea Tekheniki: Ho Tseba Tsamaiso ea PPS
Leano la Khetho ea Lintho
Keletso ea Theko: Hlalosa tikoloho ea ts'ebetso - re tla khothaletsa metsoako e ntlafalitsoeng.
| Sehlopha | Molemo ka ho Fetisisa Bakeng sa | Thepa ea Bohlokoa |
| PPS e sa tlatsoang | Litiiso tsa lik'hemik'hale | Bohloeki, ho latela melao ea FDA |
| 40% e Tlatsitsoeng ka Khalase | Li-bracket tsa sebopeho | Modulus e flexural ea 25,000 MPa |
| PPS e tsamaisang | Tšireletso ea EMI/RFI | Ho hanyetsa bokaholimo ba 10² Ω-cm |
Mekhoa ea Thibelo ea Warpage
Moralo oa Hlobo: Botenya ba lebota bo tšoanang + moralo oa 1.5°
Ho Hlophisa ka Morao: Ho Hlophisa ho imolla khatello ea ka hare
Setifikeiti le ho Latela Melao
Likoloi: Tšehetso ea litokomane tsa PPAP
'Mapa oa Tsela ea Ntlafatso ea Litšenyehelo
● Lisebelisoa: Liforomo tsa lelapa bakeng sa likarolo tse nyane
● Thepa: 15% ea ho sila hape
● Boiketsetso: Liroboto bakeng sa ho kenya mokhabiso
Moralo oa PPS oa Hlobo le Liparamente tsa Ts'ebetso
Ho Sebelisa Lisebelisoa tsa Bohlokoa
● Khetho ea Tšepe: H13 e thatafetseng (HRC 48-52) bakeng sa ho hanyetsa mafome
● Ho kenya moea: likheo tsa 0.02-0.04mm ho thibela maraba a khase
● Mekhoa ea ho Runner e Chesang: Boloka mocheso oa ho qhibiliha oa 310-330°C
Fensetere e Molemohali ea Ts'ebetso
Keletso e Molemo: Ho annealing ka mor'a hlobo (204°C ka lihora tse 2) ho ntlafatsa kristale bakeng sa ho hanyetsa mocheso ka ho fetisisa.
| Paramethara | Sebaka | Tšusumetso ea ho kheloha |
| Mocheso oa Barrel | 300-360°C | |
| Mocheso oa Hlobo | 130-150°C | |
| Khatello ea Ente | Bara ea 800-1,200 | Tlase: Matshwao a ho teba |
| Ho omisa | Lihora tse 4 ho 150°C | Mongobo >0.05%: Splay |
Lipotso Tse Botsoang Khafetsa: Ho Enta ka Ente ea PPS
P: Na PPS e ka nkela tšepe sebaka lits'ebetsong tse chesang haholo?
K: E – dikarolo tsa rona tsa PPS tse tletseng khalase di mamella 240°C ha di ntse di fokotsa boima ka 60% (mohlala, di-washer tsa phetiso ya motlakase).
P: Mabota a PPS a ka bōptjoa a masesaane hakae?
A: 0.25mm e nang le metsoako e phallang haholo joalo ka Ticona Fortron® 6165A6 (e netefalitsoe bakeng sa li-chips tsa microfluidic).
P: Na o fana ka mangolo a ho thibela malakabe?
A: E – UL 94 V-0 (botenya ba 0.8mm) e nang le terata e khanyang e lumellanang le 960°C.
P: Nako ea bophelo ba hlobo ea PPS ke bokae?
A: Lithunya tse fetang 500,000 tse nang le tšepe e thatafetseng le lipente tse khethehileng.